Two Sodimm Slots Support Up To 8gb

• Two Sodimm Slots Support Up To 8gb 2666
• Two Sodimm Slots Support Up To 8gb Ram
• Two Sodimm Slots Support Up To 8gb Ddr3
• Two Sodimm Slots Support Up To 8gb Ddr4

SODIMM module runs Linux on i.MX8M Mini or Nano with up to 8GB RAM

Jun 5, 2019 — by Eric Brown

This is my RAM config: Two SODIMM slots DDR3L-1600 MHz Dual Channel Support Supports up to 16 GB of system RAM in the following configurations: 4096 MB total system memory (4096×1) 8192 MB total system memory (4096×2) 8192 MB total system memory (8192×1) 12288 MB total system memory (8192M. DDR3 memory controller (up to 1600MHz) SODIMM (× 2) 8GB max7; PC3-MHz DDR3., non-parity, dual-channel capable, two 204-pin SO-DIMM sockets. Since the laptop have dual channeling features, just add another 4 GB ram ddr3 1600 on the other slot for faster performance (same specs as the other stock RAM). 1x 8GB Corsair Vengeance DDR3 1600MHz x3 Empty Slots Graphics Card(s) Nvidia GTX 760 PNY Enthusiast Edition XLR8 Sound Card Realtek HD onboard Monitor(s) Displays Asus VS278 (27') Screen Resolution 1920 x 1080 Hard Drives Seagate/Samsung Spinpoint M8 1TB 2.5' PSU Corsair 750W CX Case X11 ADVANCED X-Station (Red LED fans) Cooling. DirectX. Support: 12 OpenGL. Support: 4.5 Intel® Quick Sync Video: Yes Intel® InTru™ 3D Technology: Yes RAM: 8GB DDR4,support DDR4 1.2V 2133/2400/2666 260pins RAM Slot: 2 SO-DIMM slots, support up to 32GB ROM:128GB NVME SSD. Communication: WiFi: 2.4G/ 5G WiFi LAN: 1000M Bluetooth:4.1. Resolution: 4K Support: Yes, at 60Hz.

— 2104 views

[Updated: May 22, 2020] — iWave’s “iW-RainboW-G34M-SM” module runs Linux 4.0 or Android Oreo on an i.MX8M Mini or Nano SoC with 2-8GB LPDDR4, 8GB or more eMMC, 802.11ac/BT 4.2, and support for -40 to 85°C and up to 2x GbE ports.
iWave announced a 67.6 x 37mm, SODIMM form-factor compute module with support for either NXP’s i.MX8M Mini or upcoming i.MX8M Nano. Earlier this year, iWave announced a SMARC form-factor iW-RainboW-G27M with the more advanced, hexa-core i.MX8 QuadMax.

(Update: iWave has changed the layout and some of the features of the iW-RainboW-G34M-SM, as we discovered when we reported on its iW-RainboW-G34D dev kit, which is based on the module. The module no longer appears to support the i.MX8M Nano and RAM support has changed to 1GB to 4GB. We have not attempted to update this story, but the link at the end leads to the updated product page.)

iW-RainboW-G34M-SM
(click image to enlarge)

Linux 4.0 and Android Oreo BSPs will be available, as well as a “comprehensive development platform with TFT panel,” says iWave. The module supports IoT, portable hardware, video/audio streaming, industrial HMI, home automation, and signage applications.

NXP’s i.MX8M Mini and i.MX8M Nano use a more advanced 14LPC FinFET process than the i.MX8M. On the Mini, this results in lower power consumption and higher clock rates for the 1x, 2x, or 4x Cortex-A53 (1.8GHz) and single Cortex-M4 (400MHz) cores. The Mini also provides GCNanoUltra (3D) and GC320 (2D) graphics cores with video acceleration for 1080p60 instead of 4K for the i.MX8M.

The new i.MX8M Nano similarly offers up to 4x -A53 cores, but tops out at 1.5GHz. The Nano, which is pin-compatible with the Mini, has a Vivante GC7000UL 3D/2D GPU, but no VPU. It does, however, integrate a 600MHz Cortex-M7 chip and has an under 2W TDP.

The iW-RainboW-G34M-SM is equipped with 2GB LPDDR4, which can be expanded up to 8GB. This large capacity (for an Arm SoC) is supported by the i.MX8 Quad and the i.MX8M. It’s unclear if the Nano supports that much. Avnet’s MSC SM2S-IMX8MINI SMARC module, which similarly supports either the Mini or the Nano, ships with up to 4GB.

Other Mini-based COMs include Ka-Ro’s SODIMM-style TX8M, SolidRun’s 47 x 30mm i.MX 8M Mini SOM, CompuLab’s 38 x 28mm UCM-iMX8M-Mini, F&S Elektronik Systeme’s 40 x 35mm PicoCore MX8MM, and Variscite’s 55 x 30mm DART-MX8M-Mini.

The iW-RainboW-G34M-SM also ships with 8GB eMMC, which is said to be “expandable,” as well as a microSD slot and 2MB of optional QSPI flash. There’s also an 802.11a/b/g/n/ac with BLE v4.2 module. The standard model has a single GbE port, and there’s an option for a second port via a PCIe to Gigabit Ethernet PHY transceiver.

Interfaces include 2x USB 2.0 OTG and 2x serial UART, one of which supports CTS & RTS. There’s an option for a second CTS & RTS port for a total of 3x serial connections.

You also get 2x SPI, 2x I2C, 2x PWM, and single helpings of PCIe, SD, MIPI-DSI, MIPI-CSI, SAI/I2S, SPDIF, JTAG and UART debug, plus an unspecified number of GPIOs. The 3.3V module has a PMIC and supports -40 to 85°C temperatures.

Two Sodimm Slots Support Up To 8gb 2666

Further information

The iW-RainboW-G34M-SM with the i.MX8M Mini is sampling and will ship to customers from mid-2019. The i.MX8M Nano based model will launch later in the year. Pricing was undisclosed. More information may be found in iWave’s announcement, which refers to the module only as the i.MX8M mini SODIMM SOM, and the product page, which calls it the iW-RainboW-G34M-SM.

Two Sodimm Slots Support Up To 8gb Ram

Two Sodimm Slots Support Up To 8gb Ddr3

Vision 3D 137B

Two Sodimm Slots Support Up To 8gb Ddr4

• - Intel^® Core™ i3-370M Mobile Processor
  - Support Intel^® Core™ i7 / i5 / i3 Mobile Processor Family
• - 2 x 2GB DDR3 1066MHz
  - Support DDR3 1066MHz, 2 x SO-DIMM slots, Max. up to 8GB*
  

  *Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows^® 32-bit OS. For Windows^® 64-bit OS with 64-bit CPU, there is no such limitation.
• - Mobile Intel^® HM55 Express chipset
• - NVIDIA^® GeForce GT425M Graphics, NVIDIA^® 3D Vision, 3DTV Play Capable
• - 7.1 CH HD Audio
• - 500GB, 7200 rpm
  - Support 2.5' SATA HDD
• - BD Combo
• - Gigabit LAN
• - 2T2R WiFi 802.11b/g/n
• - 2 x USB 3.1 Gen1
  - 1 x MIC
  - 1 x Headphone
  - 4-in-1 Card reader (MMC/SD/MS/MS PRO)
• - 1 x HDMI
  - 1 x DVI-I (Dual-Link)
  - 5 x USB 2.0
  - 1 x S/PDIF
  - 1 x eSATAII*
  - 1 x USB 3.1 Gen1**
  

  * For eSATA function, Hot Plug function is supported in AHCI mode only. IDE mode does not support Hot Plug function.
  ** This USB 3.1 Gen1 port does not support Hot-Plug and legacy function.
• - 2.8L
• - MCE Remote Controller
• - 90W/19V Adapter
• - 200mm (W) x 70mm (H) x 200mm (L)
• - Microsoft^® Windows^® 7 / 7 64-bit / Vista™ / Vista™ 64-bit / XP / XP 64-bit compliant
  

  *Due to VGA driver limitation, 3D function only supports Windows^® 7 / 7 64-bit / Vista™ / Vista™ 64-bit.